IE-expo Chengdu

Global series












Exhibitor List

Company NANJING WOTANG OPTOELECTRONICS TECHNOLOGY CO.,LTD.
Country China
Products Analysis and laboratory techniques
Environmental monitoring techniques and equipment
Hall 5
Booth E29
Website www.wtgdkj.com
Introduction Nanjing Wotang Photoelectric Technology Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales and promotion of the laser gas analyzer, VOCs monitoring system, CEMS and industrial process gas analysis system. The company has long been engaged in the R&D and application of environmental monitoring related technologies.

Products

High Precision Laser On-Line Ammonia Escape Monitoring System
1.1 Basic principles of WTKF300 analysis system design
The unit of analysis is a laser-NH3 analyzer. To ensure the accuracy of NH3 analysis, the sample and gas flow contact part is heated and kept above 180 °C.
1.2 WTKF300 adapted process, public conditions and requirements
1 Maximum dust content < 2000 g / NM3
2 Normal temperature end temperature: ≤ 600 °C
3 Sampling point pressure: -15 ~ 15 MPa
4 Tar benzene content: < 10 g / NM3
5 Saturated water vapor
2) Applicable environmental conditions:
1 The instrument, temperature control and electric control box can be installed in the open air near the wall.
2 Ambient temperature: 5 ~ 45 °C
3 Relative humidity: 20-85%
4 Atmospheric pressure: 10 to 106 kPa (local atmospheric pressure)
3) Conditions of public facilities:
1 Power: 220V ± 10%, 50HZ ± 1HZ, Capacity: 5KVA (no strong interference)
2 Gas supply system:
1) compressed air: the system needs compressed air for the back blowing of the flue gas sample sampler, in order to ensure the back blowing effect, it is necessary to check to confirm that the compressed air meets the following conditions:
A. Clean, dry and oil-free;
B. The pressure is 4-7 Kg
4.4 Basic features of the WTKF300 ammonia escape analysis system:
1. No need for heating pipeline, near situ wall-mounted installation.
2 System smoke filtration accuracy: < 0.1 μm
3 Pedigree analysis accuracy: ± 1% FS
Response time: T90 ≤ 30S
5 System MTBF: MTBF > 3 years
2. System maintenance cycle: > 1 year
4. The whole process of the system is high temperature unloading method, sampling is not distorted, and the analysis is accurate.
Near in situ high temperature and constant temperature sampling is designed to ensure the accuracy of NH3.
4. The system has automatic back blowing soot cleaning, anti-blocking device.
10 Output signal: 4-20mA, control alarm signal NO / NC, 1A / 220V.
(Manhole / Confined Space) Wireless Multi-parameter Gas Monitor
This terminal is an advanced instrument with wireless upload function, which is used to monitor the gas concentration in the underground confined space of the city. The terminal uses laser sensor and microcomputer technology, combined with excellent low-power technology design, with saving power, display intuitive, good repeatability, long service life, easy to install, easy maintenance, convenient operation and so on.
The terminal uses battery power, and can upload the gas concentration information, abnormal type and other information to the data center through the wireless network in a fixed time or in an event (alarm) mode through the local existing cellular communication network. Combined with the system software, the statistics, query and backup of the gas concentration information can be realized.
The terminal is suitable for pump-suction interval collection monitoring and early warning of gas concentration in urban underground confined spaces such as gas valve wells, water supply and drainage wells, electric power wells and communication wells.
Product advantage
Gas concentration state monitoring, immersion detection, temperature detection;
2) Embedded integrated circuit + intelligent software;
3) Mobile NB-IOT communication module, telecommunications NB-IOT Internet of Things card, underground pipe network underground communication;
4) Unattended, remote intelligence real-time accurate alarm;
5) The electronic map displays location, basic information, and real-time status;
6) Internet of things NB-IOT wireless communication technology, cloud data interaction;
7) Remote monitoring interface, mobile phone, computer client, WeChat, SMS alarm;
8) Excellent low-power design Battery powered, battery available for 3 years, maintenance-free;
9) Real-time data, historical data, curve display;
10) Platform data export function.
11) Intrinsically safe equipment that can be used in explosion-proof areas;
12) IP68 protection level, dustproof and waterproof.
Main application

The terminal is suitable for uninterrupted monitoring and early warning of combustible gas concentration in urban underground pipeline networks such as gas valve wells, sewage wells, power wells, water supply wells, communication wells, etc.

Technical indicators

Scheme of electric power supply
Working mode parameters can be configured
Sensor Type Laser Sensor
Test parameter CH4: 0 ~ 100% LEL; Temperature -40 ° ~ + 125 °; water level
Working temperature -30 ° ~ 70 °
Working humidity ≤ 100% RH without condensation
Detection accuracy CH4: ± 5% F.S; Temperature: ± 2 °
LCD digital display
Battery life ≥ 18 months (standard operating mode)
Explosion-proof form intrinsic safety
Degree of protection IP68
Product size 285 × 125 × 70 (mm)
Product weight approx. 2.0kg
4G, NB-IoT data upload



Miniature Ambient Air Quality Monitoring System
It can provide scientific data support for the location of source of pollution, the tendency of dispersion and the influence of area. Real-time monitoring and data acquisition of common factors (CO, SO2, NO2, O3, TVOC, PM2.5, PM10, temperature, humidity, wind speed, wind direction, pressure, etc.) for the grid construction to provide effective data.
The system adopts the current advanced high-precision electrochemical and optical technology principles, and has the characteristics of fast response speed, strong reliability, low maintenance cost and long service life.
Technical characteristics
Imported sensors are selected to realize multi-parameter automatic monitoring, and anti-interference design is adopted between parameters.
It can build a regional high-resolution monitoring network to achieve precise management of the regional atmospheric environment.
Integrate GIS technology and GPS positioning function to visually display the location of key pollution areas;
The monitoring terminal is small, easy to transport and install, and supports 4G wireless transmission;
Flexible combination of monitoring factors can be selected according to project requirements;
Solar panels can be selected according to the requirements of the project, and electricity can be automatically switched.

Areas of application
Industrial parks, urban environmental monitoring, municipal environmental monitoring, mobile environmental monitoring, traffic pollution environmental monitoring, residential areas, schools, hospitals, parks and forest environmental monitoring.
Laser Online Gas Analyzer
WTKF200B laser process gas analysis system based on semiconductor laser absorption spectroscopy (DLAS) technology is a unified design and highly integrated laser gas analysis system. The system can quickly, accurately and reliably measure all kinds of industrial process gases, environmental protection exhaust gases and other process gases through the in-situ (ln-Situ) measurement method without sampling and pretreatment, providing the best solution for gas online monitoring in various industries. WTKF200 is a laser gas analyzer independently developed by Wotan Optoelectronics, a domestic gas analyzer that realizes in-situ online measurement, which is a major innovation of traditional sampling gas analyzer, and is widely used in steel, petrochemical, environmental protection and other industries.
Product Features:
1) Integrated design with high reliability.
2) Semiconductor absorption spectroscopy, digital signal processing, integrated positive pressure explosion-proof control and other technologies, compact system, high reliability; At the same time, for all kinds of explosion-proof applications, the positive pressure control module is embedded in the system, which can realize real-time monitoring of explosion-proof purge positive pressure and meet the requirements of various explosion-proof applications.
3) A number of innovative design, significantly improve system adaptability Integration of a number of innovative designs, greatly enhance the system's adaptability to various harsh application environments.
4) Intelligent design, easy to operate.
5) The system emitter integrates LCD display screen and three-proof keyboard, the user can directly operate the calibration and parameter setting on the site; At the same time, the system also supports Bluetooth communication mode, users can use WTKF200B handheld assistant and analysis system wireless communication, easy to operate, fast.


Back to Exhibitor List